PWM Remote IR Switch LED Dimming Breathing Strobe Light Module

IR Remote LED Module

LED Dimmer - Breather - Strobe Effect

A great value prewired circuit complete with remote control handset. The board operates remotely using infrared light signal. Simply connect a suitable power source to the input terminal block, and the LED/s output to the other terminal.

Select then either a dimming effect, breathing effect or strobe effect by pressing the selection button on the board to cycle through the three options.

The output / speed of each effect can be controlled using the up / down buttons on the handset.

The module has a memory function and when powered off then back on, will resume from the last effect operation.

Specifications:

Input Voltage: 5v DC to 24v DC maximum

Standby Current: 0.2mA (suitable for long-term battery use)

Operating Current: 3A maximum.

Power: 30W maximum.

Receiving Distance: 5 - 8 metres in straight line of sight.

Dimming Effect: Brightest 99%, Darkest 6%

Breathing Effect: Fastest 0.2 seconds, Slowest 5 seconds.

Flashing Effect: Single Flash Fastest 0.03 seconds, slowest 2 seconds.

Module controls circuit using the negative pole.

Module must be connected to a pure LED circuit, which cannot contain capacitors, chips etc.

Item is for adult use only (18 years plus).

Item for use in an indoor / dry environment only - not waterproof.