LED Lighting Power Distribution Board With 3v or 12v DC Output

Lighting Power Distribution Board

Ideal for model rail layouts or dioramas.

Features:

* Accepts 4v to 24v AC or DC via a choice of three input ports (see diagram).

* Maximum current of 10A

* Select desired output of either 3v DC or 12v DC

* Varianble resistor to allow leds to be dimmed.

* Supports up to 28 leds. Use further boards if more leds are required. Total led current draw must be less than current input (leds typically only require approximately 20mA each)

* Output ports include x12 pairs of screw terminal connectors, x6 pairs of JST 2.0mm connectors and x10 pairs of 2.54mm pin sockets.

* Please ensure that your output leds are suitably resistored to the voltage & current that you are using.

* Suitable power adaptor required (not included)

* Product age rating guidance: 15 years & above