Led Filament - RED - 100mm - 3v To 12v DC

Ideal for model making, signage, craft and design use.

Led filament is a thin flexible string of micro leds that give off a rich colour.

It performs better than EL Wire, in that it is completey silent in operation and uses little power.

Each filament is fitted with an extra 300mm of 0.5mm diameter tinned copper wire at either end (black: negative & red: positive), and has been pre-soldered and resistored to allow operation between 3v and 12v DC maximum.

Please note that the length of the filament itself cannot be shortened.

A great effective led unit that is easy to work with.

Specification:

These LED strings are industry standard red, but we class them nearer to the red / orange end of the colour spectrum.

Quantity: 1 strand supplied

Width: 1.5mm

Filament Length: 100mm

(plus 300mm 0.5mm negative wire & 300mm 0.5mm positive wire leads)

Operating Voltage: 3v to 12v DC maximum (with fitted resistor)

Current Draw: 200mA

Supply Current: Advised 1A maximum.