First light kit variations for the 1:25 AMT Christine plastic model kit now available in store.

There are some great bargain buy double / triple figure packs in the

"All Items - Star Wars Collectables" category. Well worth checking out :)

We're working hard behind the scenes to get the components section of the store up and running asap.

As you can imagine, there's a lot of structuring and ordering of the many component parts that we intend to offer, so please accept our apologies for the patchy appearance of this particular category - we will get there in the end, and it will be worth the wait :)

Check out some of the great quality display figures in the collectables section.

We now have a local collection point in West Bromwich town centre - ideal for larger or delicate items that are likely to be damaged in the post. Please see the Delivery Options page on the home screen for further details.

Check out the model kit section of the store to find some great model & light kit bundles to save £££!

Mr Michael Franz project will definitely be worth following. The build guide will be added at:

www.world-in-scale.de/modelle/verschiedenes/1-72-star-wars-millennium-falcon-by-revell-fine-mold/

Well worth checking out :)

5 Steps To Ordering A Bespoke Light Kit

In order to make a bespoke light kit that will best suit your requirements, I'll need the following information:

1) Power Source

You can choose from either a standard 9v battery clip, a 9v battery clip with separate switch, a 9v battery box with integrated switch, a screw terminal connector (for patching into existing circuits), and for smaller kits a Futaba lead.

2) Power & Switch Lead

Decide where you will be housing the battery in the model or display stand, and decide on the length of the wire lead needed from that point to the point from where the leds branch out. If choosing a seperate slide switch, I also need the length of the switch wire.

3) Individual LED Wires

Each LED has its own wire run. I will need the wire lengths required for each led (from the point where the leds branch out, to the led itself). Remember to allow enough wire length for ease of fitting in your model. If in doubt, allow a bit extra.

4) LED Colours & Effects

I will need the required led colour for each wire run, and if they are static or flashing, or if other effects are needed.

5) LED Sizes & Fixings

Finally I'll need the diameter of each led (most commonly 3mm, 5mm or 10mm), and if led clips are required for fitting.

Fibre Optics

As standard, we supply 1mm fibre optics at 100mm usable lengths in bundles of five or ten - connected to your chosen light source. When ordering fibre optics, I need the quantity of fibres required and the lengths of the fibres (if other than 100mm), along with the required colour.